Crimping vs Soldering: Which Suits Automotive Wire Harnesses?
Crimping vs Soldering: Which Suits Automotive Wire Harnesses? Crimping vs soldering automotive wires is an important termination decision. Both methods can produce electrical connections, but their process controls and failure mechanisms differ. Automotive harness designs often favor qualified crimp terminations because they support repeatable mechanical connections. How Does Crimping Work in Automotive Wire Harnesses? Incorrect […]
What Are the Layers of an EV High-Voltage Cable?
What Are the Layers of an EV High-Voltage Cable? EV high-voltage cable layers work together to transfer electrical power while providing insulation, environmental protection, and, where required, electromagnetic shielding. Not all EV cables have the same number of layers. Their construction depends on electrical load, routing, and vehicle architecture. What Are the Main Layers of […]
How Do You Specify Temperature Ratings for Automotive Wire?
How Do You Specify Temperature Ratings for Automotive Wire? Automotive wire temperature ratings define the operating limits of a qualified cable construction. A wire installed near hot components may experience both external heating and current-generated heat. Selection must address the complete thermal environment. What Does an Automotive Wire Temperature Rating Mean? Misreading a temperature class […]
What Is a Drain Wire and When Does a Cable Need One?

A drain wire in a shielded cable is a conductor that contacts the metallic shield and provides an accessible connection for shield termination. It is especially common with foil shielding because thin shielding tape can be difficult to connect directly to a terminal.A cable typically needs a drain wire when its design relies on that conductor to terminate the shield. It is not automatically a protective earth conductor, signal return, or power return.
Why Do Automotive Cables Use a Braided Shield?
Why Do Automotive Cables Use a Braided Shield? Automotive cable braided shielding helps control electromagnetic interference between power and signal circuits. Conductive braid can also accommodate cable bending. Its effectiveness depends on material, coverage, termination, and the complete electrical system. How Does Braided Shielding Reduce EMI? Uncontrolled electromagnetic coupling can disturb sensitive automotive communication and […]
Which Cable Sleeving Material Suits Your Automotive Harness?
Which Cable Sleeving Material Suits Your Automotive Harness? Automotive cable sleeving materials protect wiring from specific mechanical and environmental hazards. PET, nylon, fiberglass, and metal braid behave differently. Select the material based on exposure, movement, bundle size, and electrical requirements. What Does Cable Sleeving Protect Against? Uncovered harness branches can suffer abrasion, vibration wear, and […]
How Can You Extend an Automotive Wire Harness’s Service Life?
How Can You Extend an Automotive Wire Harness’s Service Life? Automotive wire harness service life depends on electrical design, routing, mechanical support, and environmental exposure. Insulation and connectors can deteriorate long before the vehicle reaches its expected operating life if installation conditions exceed their limits. How Does Harness Routing Affect Service Life? Repeated rubbing against […]
Why Do Automotive Connectors Fail After Installation?
Why Do Automotive Connectors Fail After Installation? Automotive connector failure often starts at the interface between the terminal, wire, housing, and vehicle environment. A connector may pass an initial continuity check yet develop intermittent resistance under vibration, heat, or moisture exposure. How Can Incorrect Crimping Cause Connector Failure? Loose conductor strands or incorrect barrel compression […]
Insulated vs Non-Insulated Terminals: Which Should You Use?
Insulated vs Non-Insulated Terminals: Which Should You Use? The choice between insulated vs non-insulated terminals affects electrical protection, packaging, installation, and maintenance. Both can form reliable connections when correctly specified and crimped. Select the terminal construction based on its surroundings rather than insulation color alone. What Is the Difference Between Insulated and Bare Terminals? An […]
What Is HVIL and How Does It Work in EV Wire Harnesses?
What Is HVIL and How Does It Work in EV Wire Harnesses? HVIL (High-Voltage Interlock Loop) helps detect an opened or improperly mated high-voltage connection in an electric vehicle. The interlock is typically a separate low-voltage monitoring circuit. Its purpose is to trigger an appropriate system response before unsafe access or continued high-voltage operation occurs. […]